Select Page

HPI POWER

HPI POWER

Give me the power, I need it to power thru my Thursday, I’ve thought it should be Friday since Tuesday. The Flux MLH-2200 has 11 heat-radiating ribs circling the black-anodized case. These fins help dissipate the heat away from the motor. It can handle twin 3S LiPo batteries (that’s more than 22 volts of LiPo power)  6.5 mm bullet connectors on 12-gauge motor connector wires transmit maximum power from the speed controller. With a 5 mm motor shaft, you can fit any of the available optional pinions for your Vorza, Savage Flux HP or Savage XL Flux. Made of machined aluminum housing, alloy steel output shaft, and high-precision bearings the Flux MLH-2200 also has a 4-pole rotor for high torque.

 

  FLUX MLH-2200 BRUSHLESS MOTOR

#120010   

rc-hub-120010-flux-mlh-2200-brushless-motor-3

 

 

SPECS:

  • KV (No Load): 2200KV
  • LiPo: 2-6S
  • Resistance (Ω): 0.0058
  • No Load Current: 5A
  • Poles: 4
  • Connector: 6.5mm Bullet
  • Dimensions (mm): Φ=42 / L=74
  • Shaft (mm): Φ=5 / L=18.5
  • Weight: 418g
  • Application: 1/8th Buggy/Monster Truck

*The Flux MLH-2200 must be used with an ESC that can handle the immense power it requires, the #120021 Flux ELH-6S Waterproof ESC

 

rc-hub-120010-flux-mlh-2200-brushless-motor-4

 

rc-hub-120010-flux-mlh-2200-brushless-motor-2

 

 

The Flux ELH-6S ESC is able to get up to 150 amps. It can handle twin 3S LiPo batteries (that’s more than 22 volts of LiPo power.  A large fan sits on top of the case inside a protective cover to keep things cool when the weather’s warm and you’ve been driving up to 950 amps of power (maximum boost current) through the speed controller. Extra-thick 12 gauge wires and 6.5 mm bullet connectors lead to the motor, while a pair of polarized connectors let you attach any batteries equipped with Deans style or Star plugs. Finally, a sealed electronic push button on/off switch with a long cable let you put the button just about anywhere you want on your car or truck. 

  FLUX ELH-6S BRUSHLESS WATERPROOF ESC

#120021

rc-hub-120021-flux-elh-6s-brushless-waterproof-esc

SPECS:

  • Input Voltage: 3-6S LiPo
  • Continuous Current: 150A
  • Burst Current: 950A
  • Resistance (Ω): 0.0035
  • Motor Limit: 4S LiPo <3000 KV, 6S <2400 KV
  • BEC: 6V/3A Switching BEC
  • Connector: 6.5 mm Bullet
  • Dimensions: 59.5x48x42 mm
  • Weight: 178g
  • Application: 1/8th Buggy/Monster Truck

 

rc-hub-120010-flux-mlh-2200-brushless-motor-6

 

 HPI SS-20WR SERVO (WATER-RESISTANT/6.0V/6.5KG/PLASTIC GEARED)

#120018

rc-hub-120018-hpi-ss-20wr-servo-water-resistant-6-0v-6-5kg-plastic-geared-2

 

 

FEATURES:

  • Operating Voltage: 4.8-6V
  • 4.8V: Speed: 0.14 sec/60 degrees, Torque: 4.2kg-cm
  • 6V: Speed: 0.11 sec/60 degrees, Torque: 6.5kg-cm
  • Servo Spline: 25T

SPECS:

  • Main case: 40.7×39.4×20.0 mm (excluding mounting tabs, servo spline, & cable outlet)
  • Mounting tab hole centers: 50.0×9.8 mm
  • Weight: 42 g (excluding servo horn)

 

 

CHECK OUT MORE HPI POSTS ON RC HUB 

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *

Subscribe

Recent Tweets

Pin It on Pinterest

Share This