Select Page

Author: RC HUB Staff


  S1 – YOKOMO YZ4-SF BODY $28.05 S1 – Yokomo YZ4-SF body w/ Aero wing Part# 0351 S1 – Yokomo YZ4-SF body w/ Aero wing, light-weight Part# 0351L $15.00 JConcepts – Aero S-Type Yokomo YZ2 | YZ4 rear wing only, 2pc. Part# 0192 Clear polycarbonate with protective film Includes two, S-Type wings   FEATURES: JConcepts Silencer (S1) styling Forward cab bias, dual channeling rear escape Clipped side-pods with extended runners Cock-pit “shark fin” for added stability Clear polycarbonate with protective film Includes two, S-Type wings Includes window mask and decal sheet FOR MORE JCONCEPTS ON RC HUB...

Read More


Tamiya Nissan Skyline GT-R (R32) TT-02D Drift Spec Kit Tower Stock# LXGZMJ  •  Manufacturer Stock# 58651 $179.99 FEATURES: Chassis: Plastic, bathtub type with skid shaped underside to minimize contact with the road surface Drive: Four wheel, shaft driven Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sinkR32 Electronic Speed Control: Tamiya TBLE-02S Differential: Gear type Tires: Super Driftech resin 0.94″ (24mm) wide Wheels: Matte finish metal plated, 1.9″ diameter (48.2mm), 0.94″ (24mm) wide, 12mm hex, +2° offset Ball Bearings: Shielded Suspension: Fully independent double wishbone Shocks: CVA Super Mini oil-filled plastic body Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in...

Read More


Friday sweet hibernating Friday, today’s Fan Friday will break you out of any winter time funk you may be experiencing. Neil, I’m pretty sure if we looked him up in the dictionary it would be under the word “meticulous”!!! The “box” alone would qualify him, but put all the details together the hand made bumpers, bed extension, interior details, wheel wells from a chalk container and words no longer do the build justice.                               NEIL’S BUILD INFO: Parts list: GCM Racing Skeleton Chassis RC4WD K44...

Read More


P-47D Thunderbolt 20cc ARF 67″   HAN2990   $399.99 SPECS: Approximate Assembly Time: 20+ Hours Completion Level: Almost Ready-to-Fly Engine Size: 20cc 2- to 4-stroke gas/petrol (Sold Separately) Flaps: Yes Flying Weight: 11-13 lbs (4990-5900g) Length: 0 in (1.41m) Material: Balsa Minimum Required Radio: 6+ channel, full-range transmitter and receiver (Sold Separately) Minimum Speed Control: 80A ESC Motor Size: 1800W Outrunner (Sold Separately) Retracts: Optional Servos: 7 Standard-size servos for gas, 6 for the electric power option (Sold Separately) Wing Area: 826 sq in (53.3 sq dm) Wingspan: 0 in (1.70m)                    ...

Read More


Recent Tweets

Pin It on Pinterest