Select Page

Axial 1/10 SCX10 II 1955 Ford F-100 Truck 4WD RTR

Axial 1/10 SCX10 II 1955 Ford F-100 Truck 4WD RTR

Axial 1/10 SCX10 II 1955 Ford F-100 Truck 4WD RTR

Brown – AXI03001T1

Green AXI03001T2

$409.99

Pre-orders are available now and projected to ship in late October 

FEATURES:

  • Officially licensed 1955 Ford F-100 body is mounted on the proven Axial® SCX10™ II chassis
  • Officially licensed METHOD Hole Wheels provide durability and clean looks.
  • Officially licensed Maxxis Trepador tires are molded in R30 compound for a superior grip.
  • AR44™ front and rear axles feature a single-piece design with molded truss for extreme durability.
  • High pinion design adds ground clearance, improves driveshaft angles and increases gear surface contact for greater durability.
  • Universal joint axles allow up to 45 degrees of steering and provide smoother action for an efficient, high-performance drivetrain.
  • Optimized gear ratio of 3.75 reduces the torque twist typically seen with other small pumpkin axle designs.
  • Realistic, high-strength C-channel chassis frame is made of durable steel with cross braces for reinforcement and rigidity.
  • Realistic shock hoops with multiple shock mounting positions let you adjust your suspension for maximum performance.
  • Adjustable battery tray accommodates batteries up to 32 x 44 x 147mm (3S 5000mAh) while improving weight distribution and center of gravity.
  • Mounted to the steering servo is a metal servo horn for durability and sharper steering feel.
  • Suspension and steering have strong steel links with large M4 rod ends for durability.
  • Chassis mounted servo with adjustable servo mounting system improves scale looks.
  • Front suspension design nearly eliminates bump steer
  • Oil-filled, coilover shocks with threaded shock bodies allow you to tune the dampening rate.
  • AX10™ transmission gearing overall ratio can be adjusted using different pinion and spur gear choices, allowing super high speed or competition-level crawling speed.
  • Dual slipper design uses a pad on each side of the spur gear for increased surface area, allowing more precise tuning and holding power.
  • 3-piece WB8 HD Wildboar™ front and rear driveshafts feature a strengthened slider-floater tube which reduces flex and fatigue.
  • Waterproof receiver box located on the side plates allows easy access and low center of gravity.
  • Dynamite® AW-5L ESC is 3S LiPo capable, yet easily switched “in the field” between LiPo and NiMH batteries.

 

SPECS:

  • Approximate Assembly Time:  No assembly required
  • Ball Bearings:    Full set
  • Batteries:  w/EC3 connector (sold separately)
  • Battery Dimensions:  1.2 x 1.7 x 5.8″ (32 x 44 x 147mm)
  • Body:    Trimmed and finished polycarbonate, vacuum formed interior
  • Brakes: Integral with electronic speed control
  • Charger: sold separately
  • Chassis: Steel C-channel
  • Completion Level: Ready-To-Run
  • Differential: Bevel Gear 30T/8T
  • Drivetrain: 4WD Shaft Drive
  • Gear Pitch: 32-Pitch
  • Ground Clearance: 3.0″ (77mm)
  • Height: 9.6″ (245mm)
  • Length: 19.25″ (489mm)
  • Motor Size: 540
  • Motor Type: Brushed
  • Pinion: 13T
  • Radio:   Spektrum STX200
  • Servos: Spektrum S605 metal gear waterproof chassis mounted steering servo
  • Shock Type Coil-over 2.5 – 3.5″ (61-90mm) plastic body
  • Size/Scale: 1/10
  • Speed Control:  Dynamite AE-5L 3S LiPo capable, w/LED light controller
  • Spur Gear: 56T
  • Suspension: Solid axle front and rear, 4-link design for rear
  • Tire Compound: S30
  • Tire Diameter:  4.6″ (116.8mm)
  • Tire Tread: Maxxis Trepador
  • Track:    Front and Rear, 9.1″ (230mm) distance from outer edges of wheels measured side-to-side
  • Vehicle Type:    Scale 4×4 crawler
  • Water-Resistant: Yes
  • Weight: 4.5lbs (2.04kg)
  • Wheel Diameter: 1.9″ (48mm)
  • Wheel Hex Size: 12mm Hex
  • Wheel Type: Injection molded
  • Wheel Width:   1.0″ (25mm)
  • Wheelbase:       12.3″ (313mm)
  • Width:  9.5″ (241mm)

 

 

 

 

 

 

 

 

WHAT’S INCLUDED:

  • (1) Axial® SCX10™ II 1955 Ford F-100 4WD Ready-to-Run
  • (1) Spektrum™ STX2® 2.4GHz Radio System
  • (1) Dynamite® AE-5L Brushed ESC
  • (1) Axial® 35T 540-Size Brushed Motor
  • (1) Product manual
 
 

STILL NEEDED:

  • Battery pack with EC3 connector
  • Battery charger
  • AA batteries (4) for the transmitter

 

 

FOR MORE AXIAL ON RC HUB CLICK HERE

 

FOR MORE HORIZON HOBBY ON RC HUB CLICK HERE

 

 

 

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *

Recent Tweets

Pin It on Pinterest

Share This