Select Page

Axial 1/10 SCX10 III Jeep JLU Wrangler with Portals 4WD Kit

Axial 1/10 SCX10 III Jeep JLU Wrangler with Portals 4WD Kit

Axial 1/10 SCX10 III Jeep JLU Wrangler with Portals 4WD Kit

AXI03007

$369.99

FEATURES:

  • Replica V8 engine, transmission housing and transfer case cover and protect the motor while improving scale appearance
  • Chassis tray accepts full-size, standard LiPo or NiMH batteries, with space on the side rails for running small pack sizes
  • DIG function transmission setup lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius
  • Two-speed transmission setup option also available for high and low speeds
  • Portal axles increase ground clearance and reduce torque twist
  • Adjustable wheelbase chassis allows each driver to choose the size of their chassis
  • Inner fenders and floor sides hide internal components usually visible from the side of the chassis
  • Licensed KMC Machete 3-piece beadlock wheels provide scale looks and let you remove and replace tires without gluing
  • Officially licensed Nitto Trail Grappler tires in a new taller and wider size increase ground clearance and grip
  • Fully rebuildable, oil-filled shocks include hard anodized, threaded shock bodies, coilover springs, and an emulsion-style cap with screw for easier rebuilds
  • Clear scale Jeep® Wrangler Unlimited body with detailed interior

SPECS:

  • Approximate Assembly Time:    7-10 Hours
  • Ball Bearings:    Complete set
  • Batteries:   Sold separately
  • Body:    Clear polycarbonate Jeep Wrangler Unlimited with detailed interior
  • Brakes: Integral with ESC
  • Bushing Material:   Metal
  • Charger:  Sold separately
  • Chassis:   Adjustable steel C-channel
  • Completion Level:  Kit
  • Differential: Locked
  • Drivetrain:  4WD
  • Final Drive Ratio: 45.6:1
  • Gear Pitch:  32-Pitch
  • Ground Clearance:   3 in (76.2mm)
  • Height: 9.5 in (241mm)
  • Length: 19.125 in (485mm)
  • Max Battery Dimensions:  5.47 x 1.85 x 0.98 in (139 x 47 x 25mm)
  • Motor Size:   540 (sold separately)
  • Motor Type:  Brushed (sold separately)
  • Pinion: 14T
  • Radio:   Sold separately
  • Scale:    1/10
  • Servos: Sold separately
  • Shock Type:  Oil-filled coil over spring
  • Speed Control:  Sold separately
  • Spur Gear:   40T
  • Suspension:   Multi-link solid axle
  • Tire Compound:   R30
  • Tire Diameter:  4.7 in (119mm)
  • Tire Tread:  Nitto Trail Grappler M/T
  • Track:    Front and Rear 8.9″ (226mm) distance from outer edges of tires measured side to side
  • Vehicle Type: Scale 4WD Crawler,Rock Crawler
  • Water-Resistant:  Yes
  • Weight:  6.5 lbs (2.9kg)
  • Wheel Diameter:    1.9 in (48.3mm)
  • Wheel Hex Size:  12mm
  • Wheel Type:   Injection molded 3-piece beadlock 1.9 KMC Machete
  • Wheel Width:   1 in (25.5mm)
  • Wheelbase:  12.3 in (312mm)
  • Width:  9.25 in (234mm)

STILL NEEDED:

  • 4-Channel transmitter
  • 4-Channel receiver
  • Steering servo
  • ESC (electronic speed controller)
  • Electric motor
  • Micro servo for rear dig feature
  • Micro servo for 2-speed feature
  • Battery (accepts standard and shorty packs)
  • Battery charger
  • AA batteries for transmitter
  • Paint (for polycarbonate plastic)

WHAT’S INCLUDED:

  • Axial® SCX10 III Jeep® JLU Wrangler 4WD Kit with clear body
  • Product Manual

FOR MORE AXIAL ON RC HUB CLICK HERE

 

FOR MORE HORIZON HOBBY ON RC HUB CLICK HERE

 

 

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *

Recent Tweets

Pin It on Pinterest

Share This