Select Page



Mini Pro just makes some sound and valuable tools that are just amazingly scaled down to meet RC needs. This one is for 1/12, 1/10, and 1/8 gas or electric vehicles. It incorporates an adjustable wheelbase design for up-to 370mm of allowable wheelbase; and 375mm of vehicle width. 

This is a chassis dynamometer (dyno) that measures the rpm, kv, voltage, current draw, power and torque output of your vehicle. This dyno is great tool for motor analysis, ESC (boost) adjustment, brushless sensor adjustment, gearing calculation, tire selections, and much more. The dyno is coupled with to a knurled roller via a pulley and belt to accelerate the inertial mass. We will call this a ‘flywheel’ for simplicity. Our electronic board takes the flywheel’s inertia (resistance of an object to a change in its state of motion), measures the rate it takes to accelerate and calculates the output power and torque of your vehicle. Our dyno repeatedly measures and calculates power in small increments to produce an accurate graph on a PC of the engine’s power characteristics.

R/C Chassis Dyno

UPC Code: 0753340770613   $699.99 


  • Real-Time Data Display
  • Real-Time Data Plotting in 2D or 3D
  • Multiple Charts Selection
  • Two Unit Systems: English & Metric
  • Multiple Runs on the Same Screen Graph
  • Summary Information Screen for Quick Results and Analysis
  • Graphical Gauge Setup Options
  • Graph Curves Settings
  • Logging Data, and Saved in .CSV Format
  • Edit Data Live without Using 3rd Party Software such as Excel
  • Save/Load Previous Runs, including the Graphs
  • Vehicle Top Speed Measurements
  • Print Test Results in Black or White Background
  • Compatible with RC Crew Chief (RC3) – see picture below


  • Torque: 2N/m Max (with GT2 2mm Belt) 
  • RPM: 100K Max
  • Units: English & Metric
  • Adjustable Reading and Logging Rate: Up to 50Hz


The chassis dyno uses the same flywheel housing as the motor dyno – a high quality 6061 aluminum frame cover around the flywheel to protect from high rpm vehicles. Yet we still offer the ability to see the flywheel spinning action by adding a clear window screen.





A. For Chassis Dyno with Flywheel Unit:

  • (1) R/C chassis dyno with customer’s selected flywheel unit
  • (1) 50V/180A Voltage and current
  • (1) Dyno electronic board v1.1
  • (1) Micro-B USB cable

B. For Chassis Dyno without Flywheel Unit:

  • (1) R/C chassis dyno kit
  • (1) Necessary components to attach your existing Motor Dyno Flywheel Unit
  • Please note that you need flywheel unit to use this kit. No electronics are included.


  • Allen: 1.5mm, 2.0mm
  • Phillips Screw Driver
  • Soldering Iron
  • Microsoft Windows 7, 8, 10



  • Electronic Speed Controller (ESC)
  • Battery to Power ESC and Motor.
  • R/C Transmitter and Receiver Or Servo Tester 
    (Not Required if using ESC Throttle Controller Board)
  • Windows PC with 1 USB Port
    (Two USB ports are required when using the ESC Throttle Controller Sensor)










About The Author

1 Comment

  1. Scotty Hales

    What software do i need for the dyno ?


Leave a reply

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Share This