Select Page

FLY AWAY ON A MUSTANG

FLY AWAY ON A MUSTANG

 

Tower Hobbies P-51D Mustang MkII Racer Red Rx-R

Tower Stock# LXGJUX  •  Manufacturer Stock# TOWA2016    

$119.99  Available Mid April

Tower Hobbies’ P-51 Mustang Red Racer is Receiver-Ready, so the motor, ESC and servos are pre-installed. All you have to supply is your radio system and battery. It’s made of AeroCell foam, so it repairs easily with CA adhesive. Plus, it has lots of scale touches, along with a distinctive trim scheme featuring red, white, black and gray on top and a cool checkerboard design underneath.

 

FEATURES:

Construction: AeroCell foam, repairs easily with CA glue
Wing: One-piece
Aileron Control: Dual Servo
Flaps: Optional, hardware included to make flaps operational (two servos and Y-harness required)
Brushless Motor: 30-35-1000 1000Kv
Electronic Speed Control: 30A
Landing Gear: Fixed, can be easily removed for hand launches and belly landings, steerable tail wheel, optional prehinged flaps and retracts
Wheels: Foam, two 2″ (51mm) main, 0.83″ (21mm) diameter tailwheel
Spinner: Plastic, red in color, 2.5″ (63.5mm) diameter
Servos: Four Tower Hobbies mini size, 14 oz-in (1.0 kg-cm) torque
Propeller: 10x7E composite construction, black in color
Hatch: AeroCell foam, attaches with magnets
Canopy: Clear, painted pilot figure
Warranty: Tower Hobbies guarantees this kit to be free from defects
in both material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged by use or
modification.

SPECS:

  • Length: 34″ (864mm)
  • Wingspan: 40″ (1016mm)
  • Wing Area: 282 sq in (18.2 sq dm)
  • Weight: 30 – 34oz (850 – 964g)
  • Wing Loading: 15.3 – 17.2 oz/sq ft (46.7 – 52.5 g/sq dm)
  • Center of Gravity (CG): 3″ (76mm) behind the leading edge of the wing measured at the fuselage Control Throws- Low Rate High Rate
  • Elevator, Up & Down: 1/8″ (3mm) 6° 1/4″ (6mm) 12°
  • Rudder, Right to Left: 1/2″ (13mm) 14° 11/16″ (17mm) 18°
  • Ailerons, Up & Down: 3/8″ (10mm) 18° 1/2″ (13mm) 23°
  • Optional Flaps, Down: 1″ (25mm) 24°

WHAT’S INCLUDED:

  • Preassembled Wing
  • Fuselage and Tail Sections
  • Fixed Landing Gear
  • Wheels
  • Motor
  • ESC
  • Propeller
  • Spinner
  • Servos
  • Instruction Manual
  •  Retracts are not included and can be purchased separately


 

Optional retracts (LXETTP) and Y-Harness (LXGLYW)

 

 

 

Tower Hobbies P-51B Mustang MkII Berlin Express Rx-R

Warbird made famous by Lt. Bill Overstreet during WWII

Tower Stock# LXGMRL  •  Manufacturer Stock# TOWA2018

$119.99 Available mid April

Receiver-Ready, so the motor, ESC and servos are already in place – all you have to supply is your radio system and battery.

FEATURES:

Construction: AeroCell foam, repairs easily with CA glue
Wing: One-piece
Aileron Control: Dual Servo
Flaps: Optional, hardware included to make flaps operational (two servos and Y-harness required)
Brushless Motor: 30-35-1000 1000Kv
Electronic Speed Control: 30A
Landing Gear: Fixed, can be easily removed for hand launches and belly landings, steerable tail wheel, optional prehinged flaps and retracts
Wheels: Foam, two 2″ (51mm) main, 0.83″ (21mm) diameter tailwheel
Spinner: Plastic, red and yellow in color, 2.5″ (63.5mm) diameter
Servos: Four Tower Hobbies mini size, 14 oz-in (1.0 kg-cm) torque
Propeller: 10x7E composite construction, black in color
Hatch: AeroCell foam, attaches with magnets
Canopy: Clear, painted pilot figure
Warranty: Tower Hobbies guarantees this kit to be free from defects
in both material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged by use or
modification.

SPECS:

  • Length: 34″ (864mm)
  • Wingspan: 40″ (1016mm)
  • Wing Area: 282 sq in (18.2 sq dm)
  • Weight: 30 – 34oz (850 – 964g)
  • Wing Loading: 15.3 – 17.2 oz/sq ft (46.7 – 52.5 g/sq dm)
  • Center of Gravity (CG): 3″ (76mm) behind the leading edge of the wing measured at the fuselage Control Throws- Low Rate High Rate
  • Elevator, Up & Down: 1/8″ (3mm) 6° 1/4″ (6mm) 12°
  • Rudder, Right to Left: 1/2″ (13mm) 14° 11/16″ (17mm) 18°
  • Ailerons, Up & Down: 3/8″ (10mm) 18° 1/2″ (13mm) 23°
  • Optional Flaps, Down: 1″ (25mm) 24°

 

WHAT’S INCLUDED:

  • Preassembled Wing
  • Fuselage and Tail Sections
  • Fixed Landing Gear
  • Wheels
  • Motor
  • ESC
  • Propeller
  • Spinner
  • Servos
  • Instruction Manual
  • Retracts are not included and can be purchased separately

 

Optional retracts (LXETTP) and Y-Harness (LXGLYW)

 

 

MORE TOWER HOBBIES ON RC HUB

 

 

 

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *

Recent Tweets

Pin It on Pinterest

Share This