Select Page

KYOSHO UPDATES THE PSYCHO KRUISER

KYOSHO UPDATES THE PSYCHO KRUISER

This Brute of a Monster Truck has gotten a few updates/upgrades and comes from Kyosho with a whole lot of goodies in a Readyset.  A 2.4GHz Syncro KT-201 transmitter and ultra high-torque KS-203 steering Servo installed. Combo up your lipos to 6S or 22.2V and the 1500Kv NEON 7 brushless motor can skyrocket you to top speeds of almost 50mph.  So hold steady with your trigger finger and prepare to have a blast!

 

EP MT-4WD PSYCHO KRUISER VE

w/KT-331P

Part Number 34252B $699.99

 

rc-hub-kyosho-ep-mt-4wd-psycho-kruiser-ve-kt-331p-readyset-3

FEATURES:

  • 3 diff shaft drive full time 4WD chassis and 22.2V + brushless motor produce power like never before.
  • Fully factory assembled Readyset.
  • Pre-cut 4 color printed body.
  • Pre-installed 1500Kv Team Orion NEON 7 brushless motor. (drip proof)
  • 2.4GHz R/C system with Syncro KT-201 transmitter requires no frequency band control.
  • Includes waterproof ultra high torque KS-203 steering servo.
  • Incorporates many reinforced parts such as hardened main chassis.
  • Features machined aluminum dial adjustable big bore shocks.
  • Straight cut bevel gears made from special toughened steel and gear modules on the reinforced diff ring gear are designed to match the machine’s extreme level of power.Equipped with 6-spoke black chrome wheels & block tires. Balances rough road running power with high level grip performance.
  • Stabilizers and universal joints are equipped on front and rear.
  • Mud guard installed on rear axle provides protection from dirt and mud. Promises stable performance under various running conditions.
  • Resin chassis stiffener as used on the Inferno NEO is installed on front and rear.
  • Full bearing specification features 18 bearings through the drive system and wheels with 2 in the clutch bell.
  • Large bumper provides protection for the front suspension holders and lower arm plate.
  • Compatible with many optional parts for the Inferno series.

rc-hub-kyosho-ep-mt-4wd-psycho-kruiser-ve-kt-331p-readyset-5

ReadySet Contents:

  • Pre-assembled chassis with pre-set control linkages
  • Factory assembled printed body
  • 2.4GHz R/C system Perfex KT-331P pre-installed
  • L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
  • Cross wrench (large)
  • 17mm wheel wrench

Required for Operation:

  • Battery / LiPo 2-3cell x 2 pack (with Super (Deans) plug)/use series connected.
  • Recommended: LiPo 4300 x 2
  • LiPo compatible charger
  • 4 x AA alkaline batteries for transmitter

rc-hub-kyosho-ep-mt-4wd-psycho-kruiser-ve-kt-331p-readyset-4

rc-hub-kyosho-ep-mt-4wd-psycho-kruiser-ve-kt-331p-readyset-6SPECS:

Length:     550mm
Width:     427mm
Height:     230mm
Wheelbase:     355mm
Tread (F/R):     289mm / 289mm
Tire(F/R):     148 x 66mm / 148 x 66mm
Gear Ratio:     12.375:1
Weight:     4,650g (approx.)
Motor:     1500Kv Team Orion Neon 7 brushless motor

rc-hub-ep-mt-4wd-psycho-kruiser-ve-kt-331p-readyset

rc-hub-kyosho-ep-mt-4wd-psycho-kruiser-ve-kt-331p-readyset-2

 

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *

Recent Tweets

Pin It on Pinterest

Share This