Select Page

PHOENIX INVADER

PHOENIX INVADER

Phoenix Model 1:9 1/4 A-26 Invader Twin GP/EP ARF 90.5″

Tower Stock# PMMA1820  •  Manufacturer Stock# PH170    $429.99

FEATURES:

Construction: Balsa and plywood
Wing: Two-piece, functional flaps
Landing Gear: Air-retract with CNC machined metal suspension struts, air valve system with quick-connect air hose
Wheels: Three, 4″ (100mm) diameter
Covering: High-quality self-adhesive
Cowls: Fiberglass
Motor Mounts: Plywood
Engine Mounts: Two-piecce composite plastic
Cockpit: Detailed with instrument panel, painted pilot bust
Canopy: One-piece with painted-on frame lines
Fuel Tank: –oz (–cc)

SPECS:

Wingspan: 90.5″ (2300mm)
Length: 65.5″ (1664mm)
Flying Weight: 15.4 – 17.6lbs (7000 – 8000g
Wing Area: 951 sq in (61.4 sq dm)
Wing Loading: 34.41 oz/sq/ft (105 g/sq dm)
Wing Type: NACA airfoils
Servo Mount: 0.83 x 1.6″ (21 x 42mm)
Center of Gravity (CG): 3.9″ (100mm) back from leading edge of wing measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.35″ (9mm) 10% expo 0.55″ (14mm) 12% expo
Elevators, up/down: 0.43″ (11mm) 12% expo 0.55″ (14mm) 12% expo
Rudder, right/left: 0.79 (20mm) 15% expo 1.4″ (35mm) 15% expo
Landing Gear, down: 0.59″ (15mm)

 

 

STILL NEEDED:

Radio: At least 8-channel
Servos: 9 standard size, high torque (1-elevator, 2-flap, 1-rudder, 2-aileron, 2-throttle, 1-air valve control)
Receiver Batteries: Two 6.0V NiMH, at least 2400mAh Building and field equipment Electric Power;
Brushless Motors: Two Great Planes Rimfire .32 recommended
ESCs: Two high-voltage, such as the Castle Creations HV Series
Propeller: 12×6 – 13×8 electric
LiPo Battery: Two 4S at least 4500mAh Gasoline Power;
Engines: Two .46-.55 2-stroke gasoline
Propeller: To match selected engine

 

 

 

 

 

 

FOR MORE TOWER HOBBIES ON RC HUB

 

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *

Recent Tweets

Pin It on Pinterest

Share This