Select Page

Pitts S-2B 50-60cc

Pitts S-2B 50-60cc

HANGAR 9 Pitts S-2B 50-60cc

HAN2390

$799.99

FEATURES:

  • Officially licensed scale replica of Aviat Aircraft Pitts S-2B aerobatic airplane
  • Constructed with lightweight balsa and plywood for a rigid and strong airframe
  • Iconic Pitts design featuring scale scheme by airshow pilot Rich Goodwin
  • Multiple quick release hatches allows for easy access to fuel equipment and electronics
  • Fully-painted fiberglass cowl
  • Clear canopy hatch with dual spring latches
  • Quad aileron servos for precise control and aerobatic agility
  • Double-beveled tail (elevator/rudder) control surfaces for maximum control deflection
  • Heavy duty spring tailwheel assembly
  • Easy to maintain, genuine UltraCote film covering
  • High-quality hardware includes heavy-duty ball connectors
  • Cockpit details include dash panels for realistic appeal
  • Included engine templates for easy installation of recommended power choices
  • Matching red spinner included

SPECS:

  • Approximate Flight Time:  10+ minutes with gas engine, 5-8 minutes with electric motor
  • Battery: Sold Separately
  • Battery Type: LiPo (3.7V per cell)
  • CG (Center of Gravity):  4.5 – 4.75″ (105 – 121mm) back from leading edge of bottom wing measured at fuselage
  • Channels: 6
  • Charger: Sold Separately
  • Completion Level:  Almost Ready-To-Fly
  • Engine Size:   50 – 60cc sold separately
  • Flaps:    No
  • Flying Weight:  2001-25000g
  • Power Type: Electric/Gas
  • Landing Gear:    Fixed front wheels with with heavy-duty spring tailwheel assembly
  • Material:   Wood
  • Minimum Required Radio:  6-channel
  • Minimum Speed Control:  160A
  • Motor Size:  Rimfire 50cc recommended
  • Motor Type:       Brushless
  • Oil Type & Content:  2-cycle oil required if powering with gasoline engine
  • Product Length:  70″ (1778 mm)
  • Product Weight: 18lbs (8165g)
  • Prop Range:       20X10 electric, 22X8-10 gas
  • Radio: Sold Separately
  • Receiver: Sold Separately
  • Recommended Motor Battery:  12S 5000 – 7000mAh
  • Scale:    1/3
  • Servos: Sold Separately
  • Skill Level:          Level 3
  • Speed Control:  Sold Separately
  • Spinner Size:      3.5″ (89 mm)
  • Transmitter Range:         Full
  • Trim Scheme Colors:      Red and white
  • Wing Area:         1633 sq in (105.4 sq dm)
  • Wing Loading:   28 oz/ft (94 g/sq dm)
  • Wingspan:          71.6″ (1819 mm)

WHAT’S INCLUDED:

  • Pitts S-2B 50-60cc ARF
  •  Product Manual

STILL NEEDED:

  • 50–60cc, two/four-stroke gas/petrol engine or equivalent electric motor system
  • Standard-size, High-Torque servos
  • Full-range transmitter and receiver
  • Battery for receiver and for engine ignition
  • Propeller
  • Pilot
  • Tools and adhesives (see manual for more details)

 

FOR MORE HORIZON HOBBY ON RC HUB CLICK HERE

 

FOR MORE HANGAR 9 ON RC HUB CLICK HERE

 

 

About The Author

1 Comment

  1. Mark thompson

    Please help I have just finished the build on the Pitts but having a what the moment on the COG in the manual it states that the COG is 133mm from TOP LEADING LEADING EDGE OF THE TOP WING. You state that it is the CG (Center of Gravity): 4.5 – 4.75″ (105 – 121mm) back from the leading edge of the bottom wing measured at the fuselage. please advise asap. thank you. Email
    [email protected]

    Reply

Leave a reply

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Share This