Select Page

RAW AXIAL

RAW AXIAL

Pre-orders available now projected to be available in early November….

Axial SCX10II Raw Builders Kit

Tower Stock# LXJHHK  •  Manufacturer Stock# AXI90104

$199.99

 

FEATURES:

Chassis: Scale steel C-channel side rails with adjustable body mount, adjustable bumper mounts with swaybar mounting points, mounting points for optional 2-speed and servo winch, adjustable CMS (Chassis Mounted Servo) system (servo not included), additional holes aaded to rear frame section for wheelbase adjustments 

Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar driveshafts, UVJ style front driveshafts for up to 45° of steering angle, full ball bearing drivetrain

Slipper Clutch: Dual slipper design uses a pad on each side of spur gear for added surface contact area, 32p gearing for high torque applications

Transmission: All metal gear AX10 three gear layout, metal motor plate, adjustable ratio for high speed or competition level crawling speed

Differentials: Bevel gear 30T/8T

AR44 Hi-Pinion Axle: Pinion gear is 6mm above center for added ground clearance and better driveshaft angles, high pinion design has increased surface contact for greater durability, single piece axles with molded truss for extreme durability, helical CNC cut internal gears, sintered metal single unit ring/gear locker CNC cut pinion gear, optimized 3.75 gear ratio for reduced torque
twist

Battery Tray: Easy access front mount, accommodates batteries up to 5.75 x 1.2″ (147 x 32mm) 3S, 5000mAh, with battery posts in position dimensions are reduced to 5.4 x .94″ (138 x 24mm)

Suspension: Optimized suspension geometry with integrated mounts upper and lower aluminum links, 4-link design reduces axle steer and torque twist, and guards against suspension wrap-up in high-power applications, all steel links

Shock Type: Coil over, oil-filled

Wheelbase: Mounting hardware to build an 11.4″, 12″, or 12.3″ wheelbase kit

Front Bumper: Mid-width CRC

 

 

 

 

 

 

 

 

 

 

SPECS:

  • Approximate Assembly Time:   5-7 Hours
  • Chassis:  SCX10, C-Channel Steel
  • Completion Level:  Kit
  • Differential:  Bevel Gear 30T/8T
  • Drivetrain:  4WD
  • Gear Pitch: 32-Pitch
  • Ground Clearance:   3.0 in (77mm)
  • Height: 9.4 in (239.4mm)
  • Length: 19.25 in (489mm)
  • Shock Type: Coil-Over 2.4 – 3.5 in (61-90mm)
  • Size/Scale:  1/10
  • Suspension:  Solid Axle
  • Vehicle Type: SCX10 Chassis Vehicle
  • Weight:  4.0 lb (1.81kg)
  • Wheelbase: 11.4 in (287mm) or 12.0 in (304.8mm) or 12.3 in (312.4mm)
  • Width:  8.9 in (226mm)
  • Final Drive Ratio: 40.44
  • Final Drive Ratio Range: 33.69 – 54.15
  • Pinion Gear: 15 tooth, 32 pitch
  • Spur Gear: 56 tooth, 32 pitch

 

 

 

STILL NEEDED:

  • Your choice of 1/10 scale body, tires, and wheels.
  • Motor, steering servo, ESC, and radio system.
  • 2S LiPo Batteries OR (1) 6S NiMH Battery with XT90 Connectors
  • Suitable LiPo Charger
  • (4) AA Batteries

 

 

FOR MORE AXIAL ON RC HUB CLICK HERE

 

 

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Share This