Select Page

RC4WD TRAIL FINDER 2 TRUCK KIT “SWB”

RC4WD TRAIL FINDER 2 TRUCK KIT “SWB”

RC4WD TRAIL FINDER 2 TRUCK KIT “SWB”

Part Number: Z-K0045

$379.99

FEATURES:

  • Realistic Billet Aluminum Ladder Frame Chassis “SWB”
  • R3 Single Speed Transmission
  • Center Mounted Realistic 4×4 Transfer Case
  • Yota II Ultimate Scale Cast Axle
  • True to Scale Leaf Spring Suspension
  • 5 Lug Wagon 1.9″ Steel Stamped Beadlock Wheels (Black)
  • Mud Thrashers 1.9″ Scale Tires
  • Realistic Bumpers and Skid Plate
  • Chassis Mounted Steering Servo
  • RC4WD Scale Shock Absorbers
  • Plastic Rod Ends
  • Full Ball Bearings

  • All New Hammer Transfer Case
    Ratio – 1.47:1
    Gears – Wide .8 Mod steel gears

    All New R3 Single Speed Transmission
    Ratio: 1.78:1
    Pinion/spur 14/64 = 4.57:1

    Cast Yota 2 Axles
    Ratio: 15/40 = 2.67:1
    Width at hex: 176.5mm

    Trailfinder 2 SWB Chassis
    Features – Billet aluminum construction Adjustable shock hoops

    Driveshafts
    RC4WD Punisher Metal Driveshafts
    Heavy duty steel construction

    Wheels
    Type: 1.9 Steel Beadlock Wheels with Lug Nuts

  • Hub: Pin type
  • Width: 25mm
  • Back spacing: 11mm

    TF2 SWB Dimensions
    Wheelbase: 9.9in / 242mm

  • Width: 8.3in / 211mm
  • Height: 5.55in / 141mm
  • Ground Clearance: 2.3in / 58.5mm
  • Overall Length: 15.31in / 389mm
  • Weight: 62.1oz / 1.76kg

WHAT’S INCLUDED:

  •  RC4WD Trail Finder 2 SWB
  • Universal Body Mounting Kit for TF2 SWB (Z-S1753)

FYI:

  • While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
  • Use good quality hex drivers to avoid stripping screw heads.
  • Use thread lock when putting metal screws into metal parts.
  • Steps marked with an asterisk (*) require thread lock.
  • Use thread lock sparingly.
  • Do not over tighten screws otherwise you may strip the thread.


STILL NEEDED:

Truck Kit

  • Hex Drivers (1.5mm, 2mm, 2,5mm)
  • Long Nose Pliers
  • Associated Thread Locking Adhesive
  • Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)

Electronics:

 

 FOR MORE RC4WD ON RC HUB CLICK HERE

 

 

 

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Share This