Select Page

XRAY’S XB2C 2017 CARPET EDITION

XRAY’S XB2C 2017 CARPET EDITION

Xray does it again, another great product. We have listed the updates and changes on the 2017 XB2 Carpet edition kit.

 

XRAY 2017-spec XB2C 2WD buggy

rc-hub-xray-xb2-2017-8

2017 All-new Features:

  • All-new motor position
  • All-new gear box
  • All-new gear box gears 36T
  • All-new motor plate
  • All-new rear suspension holder
  • All-new shock pistons
  • Increased steering
  • Increased traction
  • Improved high-speed stability
  • Improved reliability

Shock Pistons

Shock pistons are made from Delrin® and are molded using ultra-high precision molds. All-new 2-hole pistons (1.6mm and 1.7mm holes) are now included in the set. 

rc-hub-xray-xb2-2017-5

 

I.S.S. Suspension Holders 

To improve reliability and strength the Swiss 7075 T6 aluminum suspension holders were reinforced and strengthened.  

The aluminum suspension holders feature Integrated Suspension Settings (I.S.S.™) which allows for quick & easy suspension geometry set-up. 

Using eccentric suspension bushings – which are inserted into Swiss 7075 T6 aluminum suspension blocks – as well as additional shims and turnbuckles, the XB2 suspension geometry can be completely adjusted:

  • camber
  • toe-in
  • rear roll-center
  • anti-squat
  • track-width

rc-hub-xray-xb2-2017-4

Motor Plate

The black-coated Swiss 7075 T6 aluminum motor plate has a new design to accommodate the new right-side motor position. 

The motor plate holds the slipper clutch assembly as well as the gear box, and features an adjustable motor plate position. To reinforce the assembly, the motor plate is connected to the upper brace mount via a motor plate brace.

 

rc-hub-xray-xb2-2017-3

Gear Box Gears 

With the all-new right side motor position and new gear box, the internal gears of the gear box are also new. The new large 36T gear – which fits the new 3-gear configuration – is moulded from premium graphite composite to ensure maximum life, high strength, and minimal weight. 

rc-hub-xray-xb2-2017-2

Gear Box 

The lightweight, tiny gear box has a new internal design, accommodating a new 3-gear configuration as a result of the new right-side motor position. 

rc-hub-xray-xb2-2017

Motor Position

To increase traction, steering and high-speed stability, the motor position was changed from left to right position. This new position achieves a different motor moment which improves handling in most typical track conditions.

rc-hub-xray-xb2c-2017-11

rc-hub-xray-xb2-2017-7

rc-hub-xray-xb2-2017-9

rc-hub-xray-xb2-2017-10

 

CLICK HERE TO CHECK OUT MORE OVER AT XRAY

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *

Recent Tweets

Pin It on Pinterest

Share This